Subscribe to Email Updates

    FAQ | 3 min read

    Change Bridge Drive allocation


    If the Bridge Drive is in error or failed, the library as well will be in error and will be not accessible by Nodeum. In this case, you need to change the bridge drive allocation to a different drive.

    Proccess to be follow 

    If you need to change the Bridge Drive allocation, here is the detailed procedure to follow:

    In the Oracle SL150 Tape Library:

    From the Drive Panel, locate which Tape drive is the Bridge Tape Drive.

    From the Tape Library Configuration

    Select Configure Library Settings and change the Library Bridged Drive:

    Once done, you have to reboot Nodeum's system to update correctly the new SCSI address of the Tape Library.

    Related Categories


    Let Us Know What You Thought about this Post.

    Put your Comment Below.

    You may also like:

    Settings FAQ

    Windows 2012 - NFS Server Installation & Configuration

    Description NFS or Network File System is a distributed file system protocol. Through NFS, you can allow a system to sha...

    Settings FAQ

    Guest access in SMB2 disabled by default in Windows 10

    Guest Access In SMB2 Disabled By Default In Windows 10 Problem description In Windows 10, version 1709, Windows 10, vers...

    Tape Library management FAQ

    To capture a dump on the drive using the ethernet interface

    Applies to  Type   Oracle SL150 Tape Library Version All Versions and later IBM LTO5 Tape Drive Version All Versions and...

    Learn and grow with award-winning support and a thriving community behind you.

    Get the free version