Subscribe to Email Updates

    Tape Library management FAQ | . Less a minute

    Tape Drive in Maintenance Mode

    Description

    When Nodeum detects an issue with a Tape Drive, Nodeum puts the drive in Maintenance Mode to allow the other tasks to run on the alternative drives.

    Example

    Drives can be set in Maintenance Mode for example:

    • When too many errors are detected to mount a tape in this drive
    • If a Tape unrecognized by Nodeum is mounted in the drive

     

    To restore the functionnality of the drive with Nodeum, you need :

    • to correct the issue detected on the drive
    • stop and restart Nodeum services.

    Related Categories

    Tape Library management FAQ

    Let Us Know What You Thought about this Post.

    Put your Comment Below.

    You may also like:

    Tape Library management FAQ

    To capture a dump on the drive using the ethernet interface

    Applies to  Type   Oracle SL150 Tape Library Version All Versions and later IBM LTO5 Tape Drive Version All Versions and...

    Tape Library management FAQ

    Tape Unknown

    Description In the Tape Library Overview, some tapes could have the status Unknown or in the Tape Overview have the foll...

    Tape Library management FAQ

    Tape Library Reserved Cell/Slot

    Description Some Tape Libraries allow to reserve one or multiple cells/slot to store mainly Cleaning Cartridges. These S...

    Learn and grow with award-winning support and a thriving community behind you.

    Get the free version